33
CE60-3GSM - Installer
10.8.
Programming SIM credit request
Commands which can be sent via SMS to the control panel to check the residual credit on the SIM card – done
by the user from the control panel or via SMS – can be viewed below.
The setting depends on the phone company that provides the SIM.
You cannot use SIM operators that require UMTS technology.
All commands must begin with the SMS PIN Code (4-digit code, "
xxxx
"): the default is "
0000
" (four zeros).
Programming command
SIM Type
xxxx#cre c
SIM contract.
xxxx#cre t yyyyyyyyyyy
Rechargeable SIM with credit request done by a telephone call to the
number "yyyyyyyyyyy".
Operator will respond with an SMS.
example
0000#cre t 404
xxxx#cre s yyyyyyyyyyy testo
Rechargeable SIM with credit request done by sending an SMS to the
number “yyyyyyyyyyy”.
Operator will respond with an SMS.
example
0000#cre s 40916 CREDITO
xxxx#cre f yyyyyyyyyyy
Rechargeable SIM with credit request done by a telephone call to the number
"yyyyyyyyyyy".
Operator will response with a flash message
example
0000#cre f *123#
11.
VOCAL MENU
WARNING - Vocal Menu and programming relay as RING
The AUX relay should not be set as a RING, otherwise the call to the control panel
will be used to activate the relay and the vocal menu will be disabled.
It’s possible to call the SIM phone number of the control panel, to use the vocal menu: a voice will propose an
action that is preformed, if you press the corresponding button on the phone keypad.
For more details, see USER'S GUIDE.
Summary of Contents for CE 60-3 GSM
Page 39: ...39 CE60 3GSM Installer...
