STP Lite User Manual Revision 1.02
43
"Incoming Call" Input Event
Just as you can set an SMS message to be the trigger of the
STP Lite
device, you can also use an incoming call to serve as the trigger. You
will hear the phone ring as you try to make the call, and the call will be
rejected (it is recommended that you cancel the voice mail via the GSM
provider). The
STP Lite
has successfully triggered the STP.
To set an incoming call as the input to the STP:
1.
Click on the arrow near the
Input event
drop-down list box, and
select
INCOMING CALL
.
2.
Click on the arrow near the
From
list box, and select from a list
of possible callers to the device.
Select
ALL
to allow all callers to activate the
STP Lite
by calling the
device.
Select
GROUP
to allow only callers whose phone numbers are
listed in your Phonebook to activate the
STP Lite
by calling the
device.
You can also enter in a specific phone number that will be able to
call the
STP Lite
to activate the specified output event. Either select
the number from the drop-down list (which are the entries from your
Phonebook), or type it in manually in the
From
list box.
"RS232" Input Event
You can use a message from any RS232 device to the
STP Lite
to
serve as a trigger. You specify the message string to send to the STP,
and the
STP Lite
will respond with the specified output.
To use a text message from the computer to serve as the input to
the device:
1.
Click on the arrow near the
Input event
drop-down list box, and
select the
RS232 i
nput event.
