STP Lite User Manual Revision 1.02
35
Pin Code
The access code to the SIM card.
Valid field, only if the SIM has a pin code you should enter the same
code.
If your SIM card don’t have a pin code than the field is irrelevant.
Note:
default pin code is 1234.
The total maximum numbers is 10.
TCP Timeout 10-86400(s)
Length of time, in seconds, that a TCP session connection will remain
active without the remote connection sending any data.
Online Inputs Report
Checking this box updates
Logic Flow Lite
as to any changes in the
input and output.
Enable Output Events
Enables/disables output event execution. (similar in function to
DISARM command—see p.44—DISARM Input Event).
Configuration Settings Commands
Read Configurations from Device
This allows you to read the device's configuration, to check if the
configuration is in order, or if you need to know a specific parameter,
for example, the Unit ID.
Write Configurations to Device
Clicking on this writes the selected configurations to the
STP Lite
device.
Section 4.3
Read Inputs Command
The
Read Inputs
command on the
Logic Flow Lite
main screen is an
option that allows you to know the status of the digital input and relay
output of the
STP Lite
. This information about whether the digital input
and digital output are presently HIGH or LOW will be displayed on the
main screen above the instruction set list.
