STP Lite User Manual Revision 1.02
34
Section 4.2
Configuration Settings
Configuration Settings Screen
When you click on the
Configurations
command in the
Logic Flow
Lite
opening screen, the
Configuration Settings
screen will open up.
Fields in the Configuration Settings Screen
UNIT ID
If you employ several
STP Lite
devices, you will find it useful to be able
to identify which device is sending you a particular SMS or GPRS
message. The UNIT ID option in the Configuration Settings
Spreadsheet is what allows you to assign an identifying name to each
STP Lite
unit. In the
UNIT ID
field, type the desired name for your
particular
STP Lite
unit. When the
STP Lite
unit will send an SMS or
GPRS data, this Unit ID will appear in the display of your phone in case
of an SMS. The maximum characters you can put is 10
APN, User Name, Password
The Access Point Name (APN) must also be supplied in case of GPRS
use.
The maximum characters you can put is 18
Outgoing Call Delay (s)
This option allows you to set the amount of delay (in seconds) between
the time the
STP Lite
sends an outgoing call and then disconnects the
call.
The range of the delay is 10-30 seconds.
