background image

17

In accordance with the degree identified 
on the test track, perform the water hard-
ness setting of your machine as indicated 
below.

Enter the settings menu to change the wa-
ter hardness setting. 

Use forward/backward keys to select the 
Salt Level menu in the Settings and press 
confirm. The water hardness level seen 
in blue on the screen is the level that has 
been saved the last.

SETTINGS MENU

WATER HARDNESS

To save a new key, select the desired lev-
el using forward/backward keys and press 
confirm. The new level will be blue. Press 
back to exit salt level setting.

Detergent use

Use detergents produced only for dishwashers.
Powder, liquid and tablet detergents pro-
duced specially for dishwashers are com-
mercially available.
Detergent must be added to the container 
before starting the appliance. Store de-
tergents in a cool and dry place with their 
packaging closed, away from children. Do 
not fill the detergent container with deter-
gent more than needed. This can cause 
scratches on glasses and prevent complete 
dissolution of the detergent. If your need 
more information about the detergent to 
you are going to use, consult detergent 
manufacturers.

Filling the detergent container

To open the lid, the push detergent con-
tainer latch as shown in the figure. 

1

There are lines inside the detergent con-
tainer
 that show the levels. Use these lines to 
determine the right amount of detergent. 
Detergent container can take 40 cm

3

 de-

tergent in total.

SETTINGS MENU

SALT LEVEL

Summary of Contents for VENUS-DV01


















































Reviews: