DUDOFF VENUS-DV01, Installation & User'S Instructions

Page: 11 / 49

7
clearance around the appli-
ance to easily move the appli-
ance forward-backward during
cleaning.
• Make sure the water inlet-out-
let hoses do not get crushed
when placing the appliance.
Also, make sure that the power
cable does not get stuck under
the appliance.
• Adjust the feet for the appli-
ance to be level and stable.
The door can be opened and
closed with not problems if the
appliance is installed correctly.
• If the door of the appliance
cannot be closed correctly,
check if the appliance is level
on the floor. If not, use the
adjustable feet to balance it.
Water Connections
• Make sure that the water in-
stallation in your house is com-
pliant with the dishwasher. We
recommend you to install a
filter to the entrance of your
house or building to prevent
damage to the appliance by
contamination (sand, clay, rust,
etc.) that may come from the
city mains or your water instal-
lation at times and to avoid
complaints such as yellowing,
sediment, etc. as a result of
washing.
Water Inlet Hose
• Do not use the water inlet hose
of your old appliance (if any).
Instead, use the new water
inlet hose supplied with your
appliance.
• Run some water inside the
hose if your are going to use
a new hose or a hose not used
for a long time.
• Connect the water inlet hose
directly to the water inlet tap.
• Pressure from the tap must be
0.03 MPa (0.3 bar) minimum,
and 1 MPa (10 bar) maximum.
If the water pressure is above
1 MPa (10 bar), use a pressure