DUDOFF VENUS-DV01, Installation & User'S Instructions

Page: 46 / 49

42
PROBLEM CAUSE SOLUTION
Appliance stops during
washing.
Power cut. Wait for the power to come.
Program may be in stand-
by mode.
Start the program by cancel-
ling the standby mode.
Problem in water inlet.
Check if water hose is clog-
ged, clean the clogging.
Dishes have whitish spots.
Too little detergent.
Use required amount of
detergent.
Rinse aid setting is too
low.
Increase rinse aid setting.
Special salt is not used
although water hardness
is high.
Fill the appliance with salt
produced specially for your
dishwasher.
Salt section cover is not
closed.
Close the salt section cover.
Make sure it is closed pro-
perly.
Dishes do not dry.
A programme with no
drying process is selected.
Check the programme
chapter in the manual and
select a programme with
drying process.
Rinse aid dose is too low. Increase rinse aid setting.
Dishes have rust marks.
Mains grounding is not
proper.
Have an electrician check
your mains grounding.
Dishes have low stainless
steel quality.
Make sure kitchenware used
in the dishwasher have suffi-
cient stainless steel quality.
Washing water salt level
is high.
Lower value of salt setting.
Salt section cover is not
closed.
Close the salt section cover.
Make sure it is tightly closed.
Salt might be overflown
inside the appliance
during filling.
Make sure salt does not
overflow during filling. Clean
the excessive salt by wiping
with a cloth.