6
accordance with the details
on the type plate. Check if the
voltage value of your electric-
ity network is compliant with
the value stated on rated value
plate of the appliance before
using the appliance.
• Manufacturer will not be re-
sponsible for any damages that
may occur due to unsuitable
connections and/or failure to
provide grounding.
• Never use extension cables or
multiple sockets to connect
your appliance to the electrici-
ty network. These connections
may result in overheating.
• The fuse current value in your
house must be 10-16 Amps.
• Your appliance is set to 220 –
240 Volts. If the mains voltage
in your area is 110 Volts, have a
110/220 Volts and 3000 Watts
transformer connected on the
line. The appliance must not
be plugged in during instal-
lation.
• Always use the covered plug
supplied with the appliance.
• Washing efficiency of your
appliance will decrease in low
voltage.
• While determining the location
to install your appliance, make
sure that it is a location where
you can easily load and unload
your dishes after washing.
• Do not install your appliance
in spaces where temperature
might drop below 0°C.
• Operate your appliance emp-
ty during the initial use after
installing it at a suitable place.
• Place this appliance in a suit-
able place to protect from hu-
midity, oil, dust, direct sunlight
or exposure to water/humidity.
Do not use the device out-
doors, in humid environments
or under rain.
• Before installation, unpack
your appliance according to
the warnings on the cardboard.
• Place the appliance near the
tap and waste water outlet.
Consider that the location
cannot be changed after the
connections have been made.
• Do not hold the door or the
control panel to move the
appliance.
• Make sure there is enough
Summary of Contents for VENUS-DV01
Page 1: ...VENUS DV01 INSTALLATION USER INSTRUCTIONS DISHWASHER...
Page 2: ......
Page 49: ...K lavuz Kodu...