manualshive.com logo in svg

Ducati MULTISTRADA 1200S, Owner'S Manual, Page: 88 / 311

Share
Download
Ducati MULTISTRADA 1200S Owner'S Manual Download Page 88

Indicator "SPEED.AVG" - Average speed

This function shows the average speed of the

motorcycle.

The calculation considers the distance and time since

Trip 1 was last reset. When Trip 1 is reset, the value

is reset and the first value available is displayed 10

seconds after the reset. Dashes “- -.-” are shown on

the display during the first 10 seconds when the value

is not yet available. The active calculation phase

occurs when the engine is running and the vehicle is

stopped (moments when the vehicle is not moving

and the engine is off are not considered). The

calculated value is displayed increased by 5% to align

it with the vehicle indicated speed.

For the Europe, Canada, France and Japan versions

the default unit is km/h, while for the UK and USA

versions the default unit is mph.

Fig. 45

87

Summary of Contents for MULTISTRADA 1200S
























































































































































































































































































































Reviews:

No comments