13
E
LCD functions
When the key is turned from
OFF
to
ON
, the instrument
panel runs a
check
on all instruments (pointers, display,
lights) (fig. 5 and fig. 6).
LCD unit functions (1)
By pressing button (B, fig. 6) with the key turned to
ON
,
you can cycle between display of the trip counter and the
odometer and, if the fuel level warning light is on, the fuel
reserve trip counter.
Resetting the trip meter
If button (B, fig. 6) is held pressed for more than 2 seconds
while the
TRIP
(trip meter) is active, the display is reset
(LCD 1).
LCD unit functions (2)
Press button (A, fig. 6) with the key turned to
ON
to display
the clock and coolant temperature.
Setting the clock
Press button (B, fig. 6) for at least 2 seconds and the
time will be shown on display (2, fig. 6).
To select
AM/PM,
press button (B, fig. 6). Press button (B)
to select the hour setting function. Press (A) repeatedly
to change the hour indication. Press button (B, fig. 6) to
enter the minutes setting mode.
Press button (A) to increase the minutes; hold the button
pressed for more than 5 seconds to increase the rate of
change. Press button (B) to exit the clock setting function.
OFF
fig. 5
CHECK
1
A
B
2
fig. 6