![background image](http://html.mh-extra.com/html/ducati/monster-s4r-s/monster-s4r-s_use-and-maintenance-manual_2537695026.webp)
26
E
Adjusting the position of the rear brake
pedal
(fig. 17)
The position of the rear brake pedal in relation to the
footrests can be adjusted to suit the preferred riding position.
To adjust the position of the rear brake pedal, proceed as
follows:
Loosen the locknut (5).
Turn the pedal travel adjustment bolt (6) until the pedal is in
the desired position.
Tighten the locknut (5).
Operate the pedal by hand to check that there is 1.5 - 2 mm
of freeplay before the brake bites.
If not, adjust the length of brake master cylinder pushrod
as follows:
Slacken off the locknut (7) on the pushrod.
Screw the rod (8) into the clevis (9) to increase play,
or unscrew the rod to reduce it.
Tighten the locknut (7) and recheck the pedal freeplay.
5
6
9
7
8
fig. 17