35
E
Front fork adjusters
(MS4RS)
(fig. 29 - fig. 30)
The front forks can be adjusted for both rebound damping
and compression damping.
The settings are adjusted by way of external adjuster screws:
1) (fig. 29) to adjust rebound damping;
2) (fig. 29) to adjust spring preload;
3) (fig. 30) to adjust compression damping.
Turn adjuster (1) at the top of each fork leg with a 3 mm
Allen wrench to adjust the rebound damping.
To turn the adjuster (3, fig. 30) insert a 3 mm Allen key
through the hole as shown in figure 27. Turn the adjuster
screws (1 and 3) while counting the number of clicks;
each click corresponds to a damping setting. The stiffest
damping setting is obtained with the adjuster turned fully
clockwise fully to the “0” position.
Start from this position and turn the adjuster anti-clockwise
while counting the number of clicks, which correspond to
position “1”, “2” and so forth.
1
2
fig. 29