Throttle control
–
choke
Note
Refer to the figures on the next pages for the correct routing of the throttle cable.
Removing the choke control
Slacken the retaining screw (F) of the choke cable.
Slip off the rubber gaiter (C), slacken the check nut and turn out the adjuster (11) until it comes off the bracket.
Withdraw the choke control (2) and collect the spring (7).
Loosen screws (V) and remove the left-hand switch (14) together with choke control from the handlebar.
Open the switch and remove the stop pin (G).
Remove the complete choke control (2).
file:///C|/Documents%20and%20Settings/F4i/My%...manual/wsm/usa/Mon695_MY07_F_1_6_00.25.1.html (4 of 8) [10/7/2008 8:43:19 PM]