Ducati 999R, Owner'S Manual, Page: 109 / 380

E
16
Setting special function (vehicle model and units of
measurement)
The engine control unit transmits the correct vehicle
model and unit measurement information automatically
for the instrument panel to display. To force a change of
these parameters, turn the key from
OFF
to
ON
while
holding down both
buttons
(
1
) and (
2
).
Press the
button
(
1
) to scroll through available
configurations.
To store your selection, hold down the
button
(
2
) for
5 seconds, until the display will read OFF. Set the key
to
OFF
.
Note
The dotted boxes in the figure are the display areas
for vehicle version (normal, R or S).
Lap time recording
This function lets you record lap time and displays top
speed and engine rpm during that lap.
Select the
LAP
mode in the display (4) (see page 13).
Press the engine start button (5) while riding to start the
on-board chronometer. Pressing the button (5) again will
stop the chronometer.
Note
In the
LAP
mode, the engine may not be started
using the starter button (5).
After measuring lap times, up to 19 times may be retrieved
and displayed on the
LCD
. Pressing the
button
(
1
) will
fig. 9