8
NOTE:
•
When the heater reaches the programmed off time, the heater will be programmed
as off and will not heat. This cannot be changed.
•
Once the “W-Timer” button has been pressed, you have 5 seconds to input your
choice and press the
“W-Timer” button to move to the next option, otherwise the
heater will return to the previously used mode.
This function is only accessible using the remote control.
In order to save energy, if a window opens and causes a sudden drop in temperature the
heater will stop heating.
When activated the
symbol is shown on the display. By default this function is
deactivated. To change the status of the function, press the
“AUTO” button.
To deactivate this function press the “AUTO” button on the remote again.
When activated if the heater detects a temperature drop of 3ºC or greater within a minute
while it is heating, it will turn off and go to the standby screen.
NOTE:
If Open Window Detection engages, you will manually have to take the heater off
standby and re-engage Open Window Detection.
This function is only accessible using the remote control.
Activating this function will allow the flap located below the air outlet of the heater to oscillate
aiding in the circulation of air.
Each press of the “Swing” button turns this function on or off.
This function is only accessible using the remote control.
When activated the display will only show the power icon and cannot be altered with the
remote.
To activate this function, press the “LOCK” button on the remote. To cancel this function
press the “LOCK” button again.
11. OPEN WINDOW DETECTION
12. SWING FUNCTION
13. CHILD-LOCK FUNCTION
