22
MAINTENANCE
Engine Long Term Storage:
• Remove the spark plug and pour about 1 teaspoon of Engine oil into the spark plug hole. Reinstall the spark plug.
With the 3 in 1 switch in the “OFF” position pull the recoil starter cord several time to coat the cylinder walls with oil.
• Slowly pull the recoil starter until you feel the engine build compression (when you feel resistance). Leave the engine
in this state as this will prevent any corrosion on the cylinder walls if stored for a long period of time.
How to drain fuel
• Turn the Fuel Selector to the LPG position.
•
• Use a siphon to transfer petrol from the generator into a petrol approved container.
• Wipe up any spilled fuel with a clean rag.
• Start generator engine and let it run until it stops and all remaining fuel is consumed. Do not connect electronic
devices to generator during this process.
• Remove outer casing screws, then remove outer casing.
•
.
• Tighten the drain screw.
• Install the outer casing and tighten screws.
• When the engine has completely cooled down, turn the Fuel Cap Air Vent to the “OFF” position.
Contact with a hot engine or exhaust system can cause serious burns or fires. Let the engine
cool before transporting or storing the generator.
WARNING!
Take care not to drop or strike the generator when transporting. Do not place heavy objects on
the generator.
CAUTION!
