21
MAINTENANCE
Fuel Tank Filter
•
•
•
•
• Install fuel cap.
Fuel Filter
• To clean, remove screws, remove outer casing, and drain fuel.
• Lift and hold onto the clamp, then remove hose from tank.
•
•
•
• Install hose and clamp.
• Open fuel valve. Inspect for leakage.
• Install outer casing and tighten screws.
Storage and Transportation of the Generator:
When transporting the generator, turn the Start Switch OFF, turn the fuel selector to the "LPG" position, and
Turn the Fuel Cap Valve OFF. Keep the generator level to prevent fuel spillage. Fuel vapor or spilled fuel may
ignite.
• Remove any debris that has collected on the generator and around the exhaust and control panel. Use a brush or
vacuum to remove loose dirt.
• Inspect air cooling slots. Remove any debris if obstructed.
• For short-term storage, start the generator once every 7days.
• For semi-long term storage, add fuel stabilizer to prevent stale fuel from causing acid and gum deposits in the fuel
system and carburetor.
• For long-term storage, drain the fuel.
• Store indoors to prevent freezing.
• The generator must be shipped, run and stored in the upright position as seen
in this image.
