20
Air Filter
Wash the foam element in soapy water and let dry.
Pour a small amount of oil on the foam element then squeeze out, but do
not wring out, excess oil. Foam element should be damp, but not dripping.
•
Checking Muffler and Spark Arrestor
•
• Remove screws, then remove the muffler cover as shown.
•
Loosen bolt, then remove muffler cap, muffler screen, and spark.
.
•
Check the muffler screen and spark for carbon deposits. Remove carbon deposits with a wire brush.
•
Check the muffler screen and spark for damage. If damaged replace with P1PE replacement parts
•
Install the spark. Align the spark projection with the hole in the muffler pipe.
•
• Install the outer casing and tighten the screws.
MAINTENANCE
Do not run the generator without reinstalling the foam element or excessive piston and
cylinder wear may result.
CAUTION!
•
• Allow hot parts to cool before touching.
Avoid contacting hot areas of this unit.
WARNING!
O
IL
