24
25
DESCALE
HARD WATER WILL CAUSE LIMESCALE BUILD-UP, RESULTING
IN BLOCKAGES THAT CAUSE PERMANENT DAMAGE.
IMPORTANT NOTICE: PRODUCT FAILURE DUE TO THE
BUILD-UP OF LIMESCALE IS NOT COVERED BY GUARANTEE.
Dualit recommends descaling regularly, in a well-ventilated area to prevent limescale build up
in the machine. See Limescale warning on page 8 for frequency in your area in accordance with
the hardness of your water. It is essential that a compatible descaler is used - visit
www.dualit.com for descaler options. The descale process takes approximately 30 minutes.
Caution: Avoid contact with descaling solution. Steam released during descale
process may be harmful. Risk of scalding and injury.
KILROCK
DESCALER
MULTI-PURPOSE
KILROCK
DESCALER
MULTI-PURPOSE
KILROCK
DESCALER
MULTI-PURPOSE
KILROCK
DESCALER
MULTI-PURPOSE
KILROCK
DESCALER
MULTI-PURPOSE
1
2
3
Ensure your descaling
product is suitable for coffee
machines; follow descaling
product instructions
carefully.
Ensure the Filter Holder is
empty before attaching to
the Grouphead. DO NOT
SOAK FILTER HOLDER IN
DESCALE SOLUTION.
Place a container with a
capacity greater than 1L on
the Drip Tray underneath
the Filter Holder. The
container must not overhang
the edge of a table or
surface.
Risk of injury.
FILTER HOLDER
CONTAINER
THE DESCALER
U
N
P
L
U
G
W
H EN N
O
T
I
N
U
S
E
SW
ITC
H OFF
&
1L
4
5
7
8
9
Pull the Froth Nozzle
downwards to remove from
the Steam Wand. Position
the Steam Wand into the
container.
Plug the appliance into the
mains supply and press the
Power Switch into the ‘On’
position. You do not need
to wait for the Temperature
Indicator Light to illuminate.
Turn the Function Selector
Knob to the Coffee/Hot
Water Function to start.
Allow the descale solution
to dispense for 1 minute.
Do not engage the Steam
Function.
Risk of chemical
inhalation.
After 1 minute, turn
Function Selector Knob to
‘Off’ and switch machine
‘Off’. Allow appliance to
stand for 5 minutes, then
repeat steps 7-9 twice in
total.
REMOVE WATER
SOFTENER
POWER ON
START
DISPENSING
ALLOW TO
STAND
FROTH NOZZLE
Remove the Water Tank
from the back of the
appliance, remove the
Water Softener Bag and
place to one side. Empty the
Water Tank.
6
Fill the Water Tank with
recommended amount of
descaler (see instructions
of your descaler) and fill
to MAX line with water.
Then reinstall the water
tank. DESCALE AT LEAST
ONCE A MONTH IN
HARD WATER AREAS.
FILL WATER TANK
1L
1L
1L
