English
- 78 -
Standard
•
By pressing
/
select
Standart.
• Use “
” / “
” button to change the standard to
B/G,,
D/K, I
or
L/L'
.
Colour System
•
By pressing
/
select Colour
System.
• Use
/
button to change the colour system to
PAL, SECAM
or
AUTO
.
Search
• By pressing
/
select
Search
.
• Press
/
button to start search. The search will
stop when a signal is found.
Note:
If you press the buttons with one-step moves,a
frequency of 0.25 Mhz will be advanced.However if
you press the buttons all at once,it will advance
automatically. To stop searching at a certain time,
you may press
/
buttons.
VCR Mode
• By pressing
/
select
VCR mode
.
• Use
/
buttons to set VCR Mode on or off.
Hint:
If you want to watch a DVD , then you have to
set this item as “off”.
Decoder
You can use this mode to connect any decoder to
your TV.
• By pressing
/
select
Decoder
• Press the
/
buttons to turn it ON or OFF..
When you switch the Decoder setting to OFF, EXT1
output will be muted. In this case, EXT1 output will not
be available to display video. If it is switched ON, the
EXT-1 output will be the selected video source. Any
decoder can be connected to EXT1 to unscramble
required video signal.
Hint:
Decoder setting should be stored separately
for each programme.
Store
• By pressing
/
button select
Store.
• Press
or “
OK
” button to store the adjustments.
“
Stored
” will be displayed on the screen.
A.P.S.
• By pressing
/
button select
A.P.S
.S
.
• Press “
” button to enter the A.P.S. menu. A.P.S.
menu appears on the screen.
Auto. Programming System
Country
U.K.
Warning! All prestored programs
will be deleted
Start : Ok
Back : Menu
Exit : TV
A.P.S. (Auto Programming System) Country
Press
/
button to select your country. If you want
to exit from A.P.S. function, press the “
TV
” button.
For going back, press “
”.
When you press OK button for starting APS, all stored
programs will be erased and the following screen
will be displayed.
Auto. Programming System
Automatic tuning runs at:
78 %
State: Fine scanning ...
Exit : TV
Whenever you press the “
TV
” button, A.P.S. function
stops and Channel table appears on the screen.
If you wait until the end of A.P.S., Channel table is
displayed with the programmes found and located.
Teletext Region
• By pressing
/
button select
Teletext Region
.
• Using
/
buttons in the Install menu, select your
Teletext region. There are five options to select :
West Europe, East Europe, Turk/Gre, Cyrillic
and
Arabic/Hebrew
.
Install menu in AV modes
The following screen appears in the install menu:
05-ENG-20736-1243UK-17MB24-(HP LINE OUT-WO YPbPr)-50092444.p65
31.08.2006, 15:33
78
