DTVS DTVS-1B, User Manual, Page: 9 / 32

9
Note:
Be sure to turn on the main power at the rear of your receiver before using the receiver. Before
you press power button, the receiver is on standby mode.
After all the connections have been made properly switch on your TV. Make sure the receiver is
connected to the mains and press the POWER button to switch the receiver on. If you are using the
receiver for the first time or restored to factory default, the Main Menu will be displayed. Select the
installation and choose blind scan to search for channels (see the detailed information on page 17).
When the unit has finished scanning, all active channels found will be stored automatically. The
last found channel will be viewed. ( If you wish to stop scanning, press the
EXIT
button to exit. The
channels already found will be stored ).
Now you are ready to watch digital satellite TV channels and radio broadcasts.
First Time Installation