DTVS DTVS-1B, User Manual, Page: 7 / 32

7
Remove the battery cover from the remote control and put two AAA size batteries inside the
compartment. The diagram inside the battery compartment shows the correct way to install the
batteries
Caution:
1. Keep batteries out of childrens’ reach.
2. Don’t attempt to recharge, short-circuit, disassemble, heat or throw the
batteries into fire.
3. Always replace both batteries at the same time. Never mix new and old
batteries or batteries of a different type.
4. If you don’t intend on using the remote control for an extended period,
remove the batteries to prevent possible leakage and corrosion.
5. Do not drop, apply shock or step on the remote control.
6. Do not spill water on the remote control.
Notes: If the receiver does not operate when operating the remote
control from a close range, you may need to replace the batteries.
Using the Remote Control
1. Point the remote control towards the front of the digital set top box.
2. The remote control has a range of up to 7 metres from the set top box at an angle of up to 60
degrees.
3. The remote control will not operate if its path is blocked.
Note: Sunlight or very bright light will decrease the sensitivity of the remote control.
Installing the Batteries
+
-