DTVS DTVS-1B, User Manual, Page: 19 / 32

19
LEFT/RIGHT key.
3. Goto X - GoTo X option is used to move the motor to specified Dish position. To perform this
option - select Dish moving type as GoTo X and enter the Dish position by pressing numeric keys and
now press OK key to move the dish to specified position.
4. Advanced - This setup is used to perform the below listed Motor related settings,
* DiSEqC 1.2 Enable/Disable - To enable (or) disable the DiSEqC option by pressing OK key.
* Enable /Disable limit - To enable (or) disable the Motor limits by pressing OK key.
* Drive East/West - You can drive the motor to East/West direction by pressing Left/Right key.
* Set EAST/WEST limit - You can set the East or West limit of the motor through this option.
* Recalculate Position - This Recalculate position option will replace the logical positions set by the
user.
* Reset Position - The motor position can be reset to its reference position [0°] by using the Reset
Position option.
b) USALS setup - Advanced concept of DiSEqC1.2. It is used to position the dish automatically
without user stress. By giving the input of satellite angle, user latitude & longitude angle, motor will
be positioned automatically to the selected satellite.
Installation