DTVS DTVS-1B, User Manual, Page: 5 / 32

5
Front panel
1.
POWER
To turn the standby mode ON/OFF
2.
▲
To change the channel upward
3. ▼ To change the channel downward
4.
LED digital display:
To display the status of the receiver: when playing menu, it shows "MENU";
when watching TV channel, it shows the channel No.; when in standby mode, it shows the time.
When searching channels, it shows "TUNE".
Rear panel
1. LNB INPUT To connect to a satellite antenna and cable jacks
2.
LNB OUT
Used to connect a RF signal from the STB to either the RF input jack on your TV or to the
STB
3.
YCbCr High quality video output to connect to your TV
4.
VIDEO
Video connection port to the TV or other equipment
5.
AUDIO R/L
Audio connection port to the TV or other equipment
6. S/PDIF Digital audio output
7.
TO TV
To connect a TV via a coaxial cable
8.
AV ANT IN
To connect to television antenna input
9. RS-232 To connect to a personal computer for software upgrade
10.
POWER
Switch ON/OFF
Z1082
Serial No.
Model No: DTVS-1B
Digital Satellite Receiver
MADE IN CHINA
AC 170-240~
50/60Hz 30W Max.
RS-232
LNB INPUT
LNB OUT TO TV
TV ANT IN
13/18V
500mA Max.
Y Cb Cr VIDEO
S/PDIF R AUDIO L R AUDIO L
3 5 8
4 6 7
9
1
2
1 2
3 4
Front Panel and Rear Panel Illustration