
8
6- IMPORTANT SAFETY INFORMATION
6.1 Fire prevention:
-Minimum distance from the closest illuminable surface: 0,5 m.
- Replace any blown or damaged fuses only with those of identical value.
Attention: the fuse replacement must be made by DTS personnel or experienced
person.
-Connect the unit to mains power via a thermal magnetic circuit breaker.
6.2 Prevention of electric shock:
-High voltage is present inside the unit. Unplug the unit prior to performing any
function which involves touching the inside of the projector.
-The level of technology inherent in the X-BRICK requires the assistance of
specialised personnel for all servicing.
Please refer to an authorised DTS service centre.
-A good earth connection is essential for proper functioning of the unit.
-Never connect the unit without proper earth connection.
-The fixture should be located in places with a good air ventilation.
6.3 Safety:
-Risk Group 2 product according to EN 62471.
CAUTION. Do not look directly into the light output. May be harmful to the eyes and
skin.
-Do not stare at the operating light source.
- The luminaire should be positioned so that prolonged staring into the luminaire at a
distance of 25,94 m is not expected.
-The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or a similar qualified person.
-The unit is not for household use and must be installed by a qualified electrician or
experienced person.
-The projector should always be installed with bolts, clamps and other tools that are
capable of supporting the weight of the unit.
-Always use a second safety cable to sustain the weight of the unit in case of the
failure of the main fixing point.
-The external surface of the unit, at various points, may exceed 60°C. Never handle
the unit until at least 5 minutes have elapsed since the projector was turned off.
-Never install the fixture in an enclosed area lacking sufficient air flow.
The ambient temperature should not exceed 40°C.
6.4 Level of protection against the penetration of solid and liquid objects:
-The projector is classified as an outdoor appliance and its protection level against the
penetration of solid and liquid objects is IP65.
Suitable for wet locations.
!
!
Summary of Contents for X-BRICK
Page 1: ...X BRICK USER S MANUAL rel 1 0 GB ...
Page 35: ...35 20 LED PIXEL INVERT FUNCTION REFERENCES ...
Page 58: ...58 NOTES ...
Page 59: ...59 NOTES ...