DTS X-BRICK, User Manual, Page: 16 / 60

16
10- RDM FUNCTIONS
By using a RDM controller it is possible to set DMX address, DMX mode and other
parameters. X-BRICK accepts the following RDM commands:
RDM Device Model ID: 0x0D65
RDM PID DESCRIPTION RDM PID VALUE GET SET
Category
– Network Management
DISC_UNIQUE_BRANCH 0x0001
DISC_MUTE 0x0002
DISC_UN_MUTE 0x0003
Category
– Status Collection
STATUS_MESSAGES 0x0030 X
STATUS_ID_DESCRIPTION 0x0031 X
Category - RDM Information
SUPPORTED_PARAMETERS 0x0050 X
PARAMETERS_DESCRIPTION 0x0051 X
Category
– Product Information
DEVICE_INFO 0x0060 X
DEVICE_MODEL_DESCRIPTION 0x0080 X
MANUFACTURER_LABEL 0x0081 X
DEVICE_LABEL 0x0082 X X
SOFTWARE_VERSION_LABEL 0x00C0 X
Category - DMX512 Setup
DMX_PERSONALITY 0x00E0 X X
DMX_PERSONALITY_DESCRIPTION 0x00E1 X
DMX_START_ADDRESS 0x00F0 X X
Category
– Sensors
SENSOR_DEFINITION 0x0200 X
SENSOR_VALUE 0x0201 X X
Category
– Power/Lamp Settings
DEVICE_HOURS 0x0400 X
LAMP_HOURS 0x0401 X
Category
– Display Settings
DISPLAY_INVERT 0x0500 X X
Category
– Control
IDENTIFY_DEVICE 0x1000 X
Category
– Dimmer Settings
(Additional Messages)
CURVE 0x0343 X X
CURVE_DESCRIPTION 0x0344 X
OUTPUT_RESPONSE_TIME 0x0345 X X
OUTPUT_RESPONSE_TIME_DESCRIPTION 0x0346 X
MODULATION_FREQUENCY 0x0347 X X
MODULATION_FREQUENCY_DESCRIPTION 0x0348 X