dtm GO801/1001, Assembly Manual

Page: 3 / 12

1
·
During assembly or repair work of the automatic gate, be careful not to wear jewelery, watches or
loose clothing;
·
In order to avoid damage to the gate and / or the drive, remove any locks, ropes or loops installed on
the gate that are used to open the gate manually;
·
After installation, it is necessary to check that the mechanism is correctly set and that the drive,
safety system and emergency unlocking function properly;
·
The gate drive cannot be started and continue to operate when there is a wicket in the gate and it is
not properly closed;
·
Crush or injury protection systems (e.g. photocell systems) must work properly after the drive has
been mounted and connected to the mains;
·
The radio remote control may only be used when a safe force value is set;
·
The radio remote control may only be used if it is possible to observe the gate movement and there
are no people or objects in the movement area;
Health and safety rules