16
6.7. Deleting of the remote control from memory
Deleting single remote control from the receiver memory is as follows:
- press and hold A and B buttons,
- press the button of remote control which is to be deleted.
CAUTION!
Holding the buttons on the card for too long (more than 10 seconds) may lead to format of the memory
and as a result to the removal of ALL remote controls.
6.8. Deleting of all remote controls from card memory
We delete all remote control from the receiver
memory when we press and hold for more that 15
seconds A and B buttons.
CAUTION!
Format process of the memory card causes irreversible removal of all remote controls and turning off the
block of remote subscribing of remote controls.
6.9. Board of radio receiver EasyRX
1. channel A signal diode
2. A channel button
3. channel B signal diode
4. B channel button
5. connector of the card
6. channel C signal diode
7. C channel button
8. aerial connector
7. Acceptance tests
8
2
1
4
3
7
6
5
Fig. 11.
EasyRX board.
TIME
Fig. 10.
Formatting card.
TIME
Rysunek 9.
Deleting remote.
1
1
2
CZAS
+
PUSH DELETING
REMOTE
BUTTON
PRESS AND
HOLD
A BUTTON
PRESS AND
HOLD MIN 15s
A AND B BUTTONS