15
6.6. Blocking of remote subscribing of remote control
It is a function which prevents all remote controls, both already subscribed as well as the one subscribed
in the future, from participating in the process of remote subscribing of new remote control.
In order to protect the device against unauthorized attempts to subscribe additional remote control (particularly
essential in areas with protected access of users), it is recommended to block the function of remote subscribing
of remote controls. In order to block this function, we press A and B buttons of the radio receiver simultaneously
and next we release one of them (it does not matter which as long as the second remains pressed all the way to
the end of the procedure). After about 4 sec. A diode turns on (it means that currently the blocking of remote
subscription is turned off), we hold the button all the time. After 4 consecutive seconds B diode turns on (it means
that the function of remote subscription will be blocked). When we release the button kept, the card will
remember settings and remote subscribing of remote controls will be blocked. The procedure of unblocking is
the same, but we release the button when OPEN A diode turns on.
In the factory settings (after formatting), the blocking of remote subscribing of remote controls is turned off.
Fig. 7.
Lock / unlock.
2
RELEASE
BUTTON
A OR B
PRESS AND
HOLD
A AND B
BUTTON
1
AFTER 4s
BLINKING
LED A AND B
1
3
BEZ
BLOKADY
BLOKADA
UNLOCKED
LOCKED
RELEASE
NEXT BUTTON,
A OR B
TURN
LED B
LOCKED
TURN
LED A
UN-
LOCKED
4
4a
4b
1
2
3
4
a)
b)
1
2
3
4
Fig. 8.
Remote: a) NEO, b) VICTORY