![background image](http://html.mh-extra.com/html/dtk-computer/apex-386-40/apex-386-40_user-manual_2535909061.webp)
Step 3 — Format
The DOS command ‘Format” verifies the media and moves the system
file onto the hard disk drive. The command should be keyed in as:
A> FORMAT C:/S
If you have two partitions, you should format D from the DOS prompt.
The command should be keyed in as:
A> FORMAT D:
lf you want to use partition 1 (drive C) as the startup disk, you have to
specify the /s option when formatting the disk. You can use this
system disk to boot your system later.
Note that you don’t need to perform this procedure if you want to use
new partitions for other operating systems like Xenix, Novell or Unix.
Refer to their manuals for details.
Chapter 3: Operating Your System
7
Summary of Contents for Apex 386/40
