![background image](http://html.mh-extra.com/html/dtk-computer/apex-386-40/apex-386-40_user-manual_2535909112.webp)
configuration
— For hardware, it means a group of interrelated devices
that constitute a system. For software, it is the total of the
software modules and their interrelationships.
CPU
— Central Processing Unit. Also known as a microproces-
sor. This chip processes all the instructions in the com-
puter.
cursor
— The blinking, moving spot of light that marks the active
place on the monitor.
data
— Any kind of information. However, this word is generally
used to describe computer-related information.
debug
— A method for correcting computer errors.
default
— This is an existing setting in a computer.
DIP
— This is an acronym for Dual In-line Package, which is a
method for packaging integrated circuits.
directory
— A directory works like a desk drawer to keep files. It
contains not only your files but also the information on the
size of the file and the dates they were created and up-
dated. It is always good to organize all the related files in
the same directory.
disable
— It means to stop the operation of a circuit or device.
disk drive
— A device that stores and retrieves data.
Chapter 7: Glossary
3
Summary of Contents for Apex 386/40
