![background image](http://html.mh-extra.com/html/dtk-computer/apex-386-40/apex-386-40_user-manual_2535909048.webp)
Turbo Connector (Jumper J3)
This connector switches the system between normal and turbo
speeds.
Jumper J3
Hardware Method
Normal, Emulate
Without Cache Support
Turbo, Cache Support
in Ultra-High Speed
Note that Turbo and Normal modes can also be toggled with a software
switch invoked from the keyboard as shown below:
Speaker Connector (Jumper J4)
This connector uses only two lines for the internal speaker. The pin
assignments are listed below:
Keyboard Lock/Power LED (Jumper J5)
This connector attaches the keyswitch to your control panel and also
provide a signal to the power LED. The pin assignments are listed
below:
12
Chapter 2: Setting Up Your System
Summary of Contents for Apex 386/40
