5
Connections
ANTENNA (Female Lemo Connector)
This connector accepts both the mic/antenna and the noodle antenna.
MULTI-PIN CONNECTOR (Male multi-pin connector)
This connector mates with an external microphone and is used in conjunction
with the noodle antenna. This connector also mates with the programming
cable.
STATUS LED
Once power is applied (after approximately 3 seconds), the Status LED will turn
on (green), which indicates a successful self-test. The LED will turn off after a
few seconds, and remain off or flash green at 1 second intervals. (See program-
ming section)
ON/OFF SWITCH
(Slide Switch:
Green
dot is ON,
Red
dot is OFF)
The ON/OFF switch controls the power to the transmitter. The power is supplied
through the internal battery compartment, which holds six AAA batteries. Sliding
the switch to the green dot turns the power ON. Sliding the switch to the red dot
turns the power OFF.
CHANNEL SELECT SWITCH (Rotary Switch)
The channel select switch allows you to change transmit channels and is
located on the front of the transmitter. It is a rotary switch which requires the use
of the supplied screwdriver to turn the switching mechanism. Select a transmit
channel number by turning the rotary switch.
On / Off Switch
Multi Pin Connector
Top View
Internal Microphone
Status LED
Antenna Connector
NOTE: When Cycling power on the
unit, power switch must be left in
the off postion for at least 2
seconds before turning it back on.
NOTE: When using the noodle
antenna, the unit must be pro-
grammed to use the alternate
microphone. If no external
microphone is connected, the unit
will automatically use the internal
microphone.
