PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Broadcast Solutions, HD/SD Products,
PRORXD
100167
Revision: 7.0
Commercial in Confidence
Page 12-102
<STX>0001wdipf;2360.00;<C><ETX> “Change input frequency to 2360”
<STX>0001wsave;1;<C><ETX>
“Save scratch to config 1”
The config you edit can be different from the currently active config. This means you could edit config 8 in
the scratch area and then save it back while config 1 was active. If you edit the active config in scratch,
when you save it back it will automatically action any changes. To find the config number currently being
edited in scratch, perform an rload command.
The same process applies to Global Settings except that no config number needs to be supplied and the
commands change to “wloau” and “wsavu”. When editing globals if the changes are saved they are
actioned immediately.
Please note that when issuing read and write commands to Global and Config parameters they always read
and write to the scratch area.
The load and loau commands can also be used like a reset if any changes must be cancelled, i.e. If the user
backs out of an edit menu before saving.
Status parameters are always current and not affected by loads and saves.
Specials are actioned immediately.
12.5
Commands
Global settings
Command Description
Access Setting
Type
Default
Type
Possible Values
aout
Audio Output
Format
RW
Global
0
Integer 0=Analogue
1=Digital
ccon
Current Active
Config Number
RW
Global
1
Integer 1 to 16
dcp1
Demod 1
Downconverter
Preset
RW
Global
0
Integer 0=Off
1=UHF
2=DCB100150
3=DCB150200
4=DCB200250
5=DCB250300
6=DCB300350
7=DCB340370
8=DCB450500
9=DCB550600
10=DCB810860
11=DCBGS100150
12=DCBGS167203
13=DCBGS203255
14=DCBGS310360
15=DCBGS440550
16=DCBGS550600
17=DCBGS640700
18=DCBGS700750
19=DCEBGS198270
20=DC100140
21=DC225265
22=DCBGS175238
