AEON Family User Guide
Commercial in Confidence
Video, Broadcast
100249
Revision: 1.0
Commercial in Confidence
Page
10-66
AEON-MESH Configuration
There are some basic configurations that will have to be checked and set as appropriate to ensure a
successful transmission.
Note
: If changes are needed, ensure that the
Apply
button is clicked to save the changes.
On the
Global
tab ensure that the Application is set to
MESH
and configure the
IP
settings
for the network.
On the
Mesh
tab set up the modulation parameters, ensuring the correct
Frequency
and
Channel
Bandwidth
requirements for the system.
The
Mesh ID
should match for all Nodes in a Mesh network but the
Node ID
must be unique from 0 to 16.
Set the Transmitter
Enable
checkbox to turn the RF power on.
Some consideration will need to be made to the
Unit
tab Operating Mode settings when transmitting 4K
quality video as it will be necessary to put the unit into
MIMO Mesh
mode in order achieve the data
requirements.
