AEON Family User Guide
Commercial in Confidence
Video, Broadcast
100249
Revision: 1.0
Commercial in Confidence
Page
6-49
Property Value
Description
Mode
Low bitrate
Low latency
Select
Low latency
to minimise delay at the expense of bitrate.
Baud
rate
1200 to 115200
The baud rate of the output.
Format
8B None, 8B Even, 8B Odd,
7B None, 7B Even, 7B Odd
The data and parity bit.
IP Port
42391
These set an IP Port to and from which the data will be
transferred.
The user can connect to the data port through Telnet by setting
the mode to TCP and the port number to 23.
The user can connect two data ports on different units by
setting UDP mode and using the aligning port numbers.
IP
Address
255.255.255.255
The IP address of the destination computer which wishes to
connect or all 255’s for any host.
These set an IP address to and from which the data will
transferred.
RS-485 Control Pane
Property
Value
Description
Camera 1 Address
0 to 255
The attached camera must be given a unique address
which the AEON Transmitter must match.
PTZ Pane
Property
Value
Description
Interface
Off
RS-485
The serial interface for the transfer of data between your
camera and the AEON Transmitter unit.
This will change where the PTZ commands go to on the
Camera Control connector.
Protocol
VISCA, Pelco-D
Control protocols for PTZ devices.
Baud rate
1200 to 115200
The baud rate of the output.
Data format
8B None, 8B Even, 8B Odd,
7B None, 7B Even, 7B Odd
The data and parity bit.
