SPLINE
®
Technical Manual
33
Ma
int
e
n
a
nc
e of
the
Re
ar
Wh
ee
l
Hu
b [
T
w
o
P
a
w
l Syst
em]
V2
01
3.
1
1
_E
N
Removing Adapters, Rotor and Rotor Sealing
1.
Clamp the axle at the non drive side into a vice
using the axle holder.
2.
Loosen the knurled disc (fig.4.5/1) on the drive
side using a 17 mm wrench.
3.
Clamp the axle at the drive side into a vice using
the axle holder.
4.
Loosen the knurled disc (fig.4.5/1) on the non
drive side using a 17 mm wrench.
5.
Unscrew and remove the knurled disc (fig.4.5/1)
and the adapter (fig.4.5/15).
6.
Pull off the rotor (fig.4.5/14) carefully.
