SPLINE
®
Technical Manual
67
Rebuildi
n
g the
Whee
l [ROAD
]
V2
01
3.
1
1
_E
N
5.6.2 Putting on the Spokes on the Rear Wheel
General:
The crossing of the spokes must always be like shown
in the picture.
1.
Slide all spokes through the spoke holes on the
first side of the hub.
For easier handling, first put the spokes into the
inner side of the hub.
2.
Slide all spokes through the spoke holes on the se-
cond side of the hub.
For easier handling, first put the spokes into the
inner side of the hub.
3.
Connect the «spoke tree» to the rim (see
