SPLINE
®
Technical Manual
22
Ma
inte
na
nce
of
the
Fron
t Whee
l Hub [
P
res
se
d
on
Ad
ap
te
rs]
V2
01
3.
1
1
_E
N
Removing the Adapters
NOTE
Risk of damage to the adapters and the ball bearings!
The mounting pin must not touch the ball bearing while disassembling the adapters.
1.
Plug the mounting pin of the tool set into one of
the adapters (fig.4.3/2/8).
2.
Push the mounting pin downwards (see picture).
3.
Remove the adapter (fig.4.3/2/8) and the cover
(fig.4.3/1).
4.
Repeat steps on the second adapter.
