![DT Research WebDT 375 Operation Manual Download Page 45](http://html1.mh-extra.com/html/dt-research/webdt-375/webdt-375_operation-manual_2535686045.webp)
WebDT 375 Operation Guide
40
375V0304.0139
need to have network identification and encryption information that your IT department or your Internet service
provider can provide. You will also need a wireless 802.11b access point connected to the Internet. To enter the
network settings, use the stylus to tap Start > Settings > Control Panel. Double-tap the Network and Dial-up
Connections icon. Double-tap PRISMNDS1 (if your WebDT 375 came with a different wireless adapter installed,
choose the name of the network connection which corresponds to the network adapter in use). From this window,
you can make the necessary changes to IP addresses, and DNS servers. From the Wireless Networks tab, you
can make necessary changes to WEP (encryption) settings. While the unit is charging, you can start to familiarize
yourself with the other applications on the unit. You will find that Microsoft Pocket Word and the other applications
are familiar, but limited, in function.
POWERING ON/OFF
In general, how do I turn it on?
The Suspend button is on the left hand side of the WebDT 375. Press the Suspend button momentarily, and
release. The WebDT 375 display will come on almost immediately.
The following exceptions apply:
If this is the first time you are powering on the WebDT 375:
- you will need to connect up the AC-DC adapter and briefly press the Suspend button.
If the device has been left idle for many hours or days without charging and pressing the Suspend button without
the AC-DC does not activate the device:
- you will need to connect up the AC-DC adapter and briefly press the Suspend button.
NOTE:
The displayed state depends on whether the device is being turned on from (Forced) Suspend or Power
Off mode. In the former, the preserved state of the device is displayed. In the latter, the device splash (logo)
screen will appear prior to the eventual display of the default startup (desktop) screen.
How do I turn the unit off?
You can turn off the unit by pressing the Suspend button on the left hand side of the unit. The screen will go dark
almost immediately, and all open applications will be retained for the next time you power on. Do not hold on to the
Suspend button for too long (4 seconds or more), under normal operating conditions, as this will power the unit off.
You may lose valuable user data and device information.
My WebDT 375 will not turn ON.
Verify that you had pressed the Suspend button briefly. Ensure that the WebDT 375 has power. Plug the WebDT
375 into the AC power adapter that shipped with the panel, and plug the unit into a wall outlet. Watch the battery
LED to ensure that it blinks slowly in Green color to indicate charging of the battery (the LED may also glow steady
Green if the battery is fully charged). Press the Suspend button on the left side of the panel. If the WebDT 375
turns on, the displayed state depends on whether the device is being turned on from (Forced) Suspend or Power
Off mode. If you continue to have trouble, contact your device provider for support.
My WebDT 375 will not turn OFF.
You may turn off the device in two ways – Suspend or Power Off (Reset).
To properly enter Suspend mode, press and release the Suspend button on the left hand side of the WebDT 375.
If you engage the Suspend button within 15 seconds of pressing it a previous time, the Suspend function will not
occur until the 15 seconds have elapsed. If the screen remains on, you may need to perform a Power Off or Reset
to shut the device down. Hold the Suspend button in until the screen goes dark – it should take over 4 seconds.
Summary of Contents for WebDT 375
