DT Research WebDT 375, Operation Manual

Page: 35 / 59

WebDT 375 Operation Guide
30 375V0304.0139
Attach the battery pack to the battery cradle (
Figure 4)
.
Figure 4: Insertion of WebDT 375 External Battery Pack.
The charging (Yellow) LED lights up and blinks if the battery pack is being recharged.
When charging is complete or if the battery pack is fully charge, the LED will show solid Yellow.
Do not forget to replace the protective rubber patch after the battery pack has been removed.
NOTE:
The cradle and battery pack are designed to be held together with the cradle placed horizontally. When
the battery pack is seated on the cradle, do not orient the package in a non-horizontal position.
NOTE:
The battery cradle has two connector interfaces, one for the
WebDT
375 optional battery pack and the
other for the
WebDT
325 removable battery pack. Each connector interface is designed to mate only with the
matching battery pack and will
not
interfere with
or be affected
by the operation of the other battery pack.
Nevertheless, the battery cradle is shipped with protective rubber patches over each connector interface. Please
remember to remove the corresponding patch when applying a particular battery pack to be recharged and to
replace it when the battery pack is removed.