DSX Access System, Inc. algo 8028, Manual

Page: 9 / 31

|
Algo 8028 SIP Doorphone
| 9
Verify the 8028 Control Unit Front Panel LEDs
After about 30 seconds, verify the Control Unit front panel LEDs. The LEDs will be different after you program
the doorphone and the DSX.
Power
: On steady then blinks off briefly every 2 seconds.
Telephone
: Off.
Door Station : On steady.
Lock : Off
Get the 8028 Control Unit IP Address
You must have the 8028 Control Unit IP address in order to program the unit. If the 8028 Control Unit was at
default when you plugged it in, you can have the unit speak the IP address (obtained via DHCP from the DSX
LAN) by pressing the doorphone call button. If not, you can do one of the following:
• Default the 8028 Control Unit following the instructions in the
8028 SIP Doorphone Installation and User
Guide
.
• Download the 8028 Locator Tool from http://www.algosolutions.com/8028locator. It will scan your LAN and
identify each 8028 Control Unit installed.
• Review the site's router log. To help with identification, the MAC address for the 8028 Control Unit is printed
on a label affixed to the bottom of the unit.
Conditions and Defaults
Conditions
• None
Default Setting
• No SIP doorphones are enabled in programming.
Other Related Features
Features
• Call Coverage Keys
• Set up a Call Coverage key for the doorphone Ring Group to monitor Ring Group Ringing from the
doorphone. This allows extensions that are not members of the Ring Group to answer ringing doorphone
calls. After answering, extensions with Call Coverage keys to the doorphone Ring Group can also activate
the relay. Call Coverage keys do not work with doorphone chimes.
• Call Forwarding
• An extension user cannot forward a call to a doorphone.
• Hotline
• Set up a Hotline key for the doorphone extension number to (1) call the doorphone and (2) provide a
doorphone BLF. The Hotline key cannot answer doorphone calls.
• Message Waiting
• An extension user cannot leave a Message Waiting at a doorphone.