background image

 | 

Program 2000

 | 27

Program Options

0

Normal Ring Group ringing (Default)

1

Chime 1 (low pitch)

2

Chime 2 (mid range pitch)

3

Chime 3 (high pitch)

 

2101-06: Door Control

 [Stations:  > Config:  > Setup:  > Type (2101):  > Door Control]

Option renamed Door Control (from 

Door Relay Assignment

) in software versions 3.43 and

higher and the 

Dial Code option

 option is added.

This option has two functions:

1.

If the connected system is a DSX-40 and the extension is a Door Box, use this option to assign the Door Box

relay. This is the DSX-40 built-in relay that will activate when the Door Box is answered by a DSX user who

then presses the 

Open

 soft key.

2.

If the connected device is a SIP doorphone (like the Algo 8028), use this option to enable DTMF relay control.

If enabled, for example, when a keyset user answers the doorphone call and presses their 

Open

 soft key, DSX

will send the digit specified in  2101-07: Open Code [Stations: Config: Setup: Type (2101): Open Code]  on

page 27 to the doorphone. If the doorphone has the digit set up as an open code, the doorphone relay will

activate.

Features Related to this Program

Telephone Features
• Door Box
• Door Box, Algo 8028 SIP Doorphone on page 6
• Paging
IntraMail Features
• None

Program Options

0

None [Default]

1

CPU Relay 1 (DSX40-1)

2

CPU Relay 2 (DSX40-2)

3

Dial Code

 

2101-07: Open Code

 [Stations:  > Config:  > Setup:  > Type (2101):  > Open Code]

Available in software versions 3.43 and higher.

If the extension is a doorphone with DTMF relay control (such as the Algo 8028), use this option to assign the

DTMF digit that will activate the doorphone relay. When the keyset user talking to the doorphone presses the

Open

 soft key, the system will send the digit specified in this option to the doorphone. If the programming in the

doorphone is set up correctly, the doorphone relay will activate.

Features Related to this Program

Telephone Features
• Door Box
• Door Box, Algo 8028 SIP Doorphone on page 6
• Paging
IntraMail Features

Summary of Contents for algo 8028
































Reviews: