DSX Access System, Inc. algo 8028, Manual

Page: 15 / 31

|
Algo 8028 SIP Doorphone
| 15
DSX can send DTMF tones to the Algo doorphone to control the 8028 Control Unit relay. The relay
can operate with:
•
Timed Activation
, where the DSX user presses a soft key to activate the relay and the relay
automatically deactivates after a preset interval.
• Push to Activate and Deactivate , where DSX soft keys control the activating and deactivating of
the relay.
2.
Go to Option 1 or Option 2 below to set the relay operating mode.
Option 1. Set up the Algo 8028 for Timed Activation relay mode.
1. In the Algo 8028 Control Panel, go to Basic Settings: Door Relay: Door Relay Settings .
• Enter a valid DTMF digit for Momentary Open Code The Algo 8028 default is 6.
• Check the
Duration
setting for compatibility with your application.
2.
2101-06: Door Control [Stations: Config: Setup: Type (2101): Door Control] on page 27
Set the
Door Control
to 3 (Dial Code).
Option Description
0 [Default] None.
1 CPU Relay 1 (DSX40-1)
2 CPU Relay 2 (DSX40-2)
3 Dial Code
3.
2101-07: Open Code [Stations: Config: Setup: Type (2101): Open Code] on page 27
Enter the same DTMF digit you entered in the Algo 8028 for Momentary Open Code .
Option Description
0-9, # and * DTMF digit. [Default] no entry.
4. 2101-08: Close Code [Stations: Config: Setup: Type (2101): Close Code] on page 28
Leave this entry blank.
Option Description
0-9, # and * DTMF digit. [Default] no entry.
Option 2. Set up the Algo 8028 for Push to Activate/Deactivate relay mode.
1. In the Algo 8028 Control Panel, go to Basic Settings: Door Relay: Door Relay Settings .
• Enter a valid unique DTMF digit for Latch Open Code (e.g., 5).
• Enter a valid unique DTMF digit for
Latch Closed Code
(e.g., 4).
2.
2101-07: Open Code [Stations: Config: Setup: Type (2101): Open Code] on page 27
Enter the same DTMF digit you entered in the Algo 8028 for
Latch Open Code
(e.g., 5).