* *
8 Channel Amplifier Matrix Controller
5
D. Interface Instructions
4.1 Start-up
Firstly, please connect an external amplifier, speakers for each zone correctly, and turn up the external amplifier’s
volume to the highest level before start-up. In this way, the system will finish the zones loading initialization after
powering on. Then switch on the power to enter the welcome interface as the figure 1-1:
Figure 1-1 Welcome interface
4.2 Main interface instructions
The display will show the main interface automatically (the factory setting is 8 main and 1 standby amplifier
modes). As figure 2-1 shown, the status of 8 zones figure 2-1 shown, the status of 8 zones are shown on the main
interface.
Figure 2-1 Main interface
1.
The specifications (zone status bar displays the real-time working status for each zone) in the main interface
are as below:
Mode: this device has 4 working modes: 8 mains and 1 standby, 4 main and 1 standby, 4 main and 4 standby
Amplifiers
status
Zones status bars
Upper part for
on and off each
zone
Lower part for
entering
zones
settings interface
