* Fire control/public address system
paging selector
Remote paging selector
MAG2588
11
4.3.3
Backlight time
Go to the "System Setting" menu, touch the " backlight time" icon to enter the backlighting time setting
interface.
Touch the lighting time value or the circle at the front of the “normally on” state, when the circle
becomes white and displays “√”, it indicates selected. If you do not carry out any operation on the
paging selector within the selected time, the display backlight will turn off automatically, which can
save energy and extend the life of the display.
After setting, touch "OK" button to confirm and exit the setting interface, or directly touch "Back" to
cancel the setting and exit the setting interface.
4.3.4
Microphone setting
Go to the "System Setting" menu, touch the "Microphone Setting” button to enter the microphone auto-off
time setting interface.
Touch the time value or the circle at the front of the “normally on” state, when the circle becomes
white and displays “√”, it indicates selected. If there is no signal input for the microphone within the
selected time, then the microphone and the paged partitions of the paging selector will be turned off
automatically.
After setting, touch "OK" button to confirm and exit the setting interface, or directly touch "Back" to
cancel the setting and exit the setting interface.
4.3.5 Bell setting
Go to the "System Setting" interface, touch the "bell" button to enter the bell selection options.
Touch the circle in front of "Bell 1", "Bell 2" and "Bell 3", when the circle becomes white and
displays “√”, it indicates selected.
Touch the “OK” button to save and exit
Touch the “ ” to exit the system setting interface in the “System Setting” menu and return to the
main menu.
