* Fire control/public address system
paging selector
Remote paging selector
MAG2588
7
4.2.3 Partition paging operation
Carry out paging operation on partitions:
Firstly touch the "partition page" icon on the upper right corner of the main menu (the selected
"partition page" button displays the white side), then touch the partition button that gives paging to
select the partition (the selected partition turns pink), and then touch this partition to end the paging
(the color changes to green).
When paging all partitions, firstly select the "partition page" button on the upper right corner, then
touch the “partition fully-open” to page all partitions, then touch the “Partition Off” button to stop
paging.
Note: After paging, touch the small microphone icon
in the upper right corner, the microphone will
be turned on, the small icon will turn green, and then touch again to close it. When the partition is
fully open, the microphone will be opened. When the partition is fully closed, the microphone is
turned off.
4.2.4 Grouping state display
Four grouping states, as shown below:
