* Fire control/public address system
paging selector
Remote paging selector
MAG2588
8
4.2.5
Grouping Paging Operation
Grouping paging operations:
Touch the "Group paging" icon in the upper right corner of the main menu (the selected "partition
page" button displays the white side), then touch the corresponding group button to start the page.
Touch the packet again to stop paging and let the paged groups resume the state before the paging
operation.
To page all groups, first select the "Group Paging" button on the upper right corner, then touch the
"Group fully –open" button to select all groups to start paging. Touch the "Group fully-closed” button
to stop paging.
Note: After paging, touch the small microphone icon
on the upper right corner, the microphone will
be turned on, the small icon will turn green, and then touch again to close it.
4.2.6
Other operations
The "Page up" "Page down" buttons control the page up and down of "partition paging", "group paging".
The "State Recovery" button means to return to the previous state.
"Bell" button, the bell audio output (select the bell I, II, III on the system setting)
In the main menu, touch "" icon to exit the main menu, return to the power-on password input window.
4.3 System Setting
Touch the “system setting” icon on the main interface to enter the system setting window, which is displayed as
follows:
