6
: light load, zone on
: overload, zone off
: overload, zone on
: load short circuit, zone off, zone cannot be turned on
Note:
If some zones are not used, please insert a 4P/5.08MM interface with 1.5K/0.25W resistors into the unused
output as shown in Figure 2-3 (this interface with resistor is not allowed to connect the amplifier output), so that
all the zones will be displayed normally.
Figure 2-3
Figure 2-4
Click to view
operation
instruction and
function
introduction.
Impedance
threshold setting
button, press Enter to save your
change
Display detection time
interval (h/m/s)
