DSPPA MAG2126, User Manual

Page: 8 / 15

5
Figure 2-2
(1) Zone function description

All zone detection:
press this button to detect all 20 zones.

Single zone detection : press this button and choose a zone to detect. Note: no other operation could be
done at the same time.

Single zone calibration: press this button and choose a zone to calibrate (only zones that are
successfully connected and load rate is not 100% could be calibrated individually). Note: no other
operation could be done at the same time.

All zone on : press this button to turn on all zones.

Fault Ack: this button will turn red and give alarm when there is light load or overload in some zones.
Press it to stop giving alarm.

Status display : click “ ” to enter the interface as Figure 2-4.

System settings: click “ ” to enter the interface as Figure 3-1.
(2) Zone status description

: normal load, zone off

: normal load, zone on

: load open circuit, zone off

: load open circuit, zone on

: light load, zone off